57Axis video server - System optionsResetting to the factory default settingsTo reset the Axis video server to the original default settings, go to the System Options >Maintenance web page (described in Maintenance, on page 55) or use the control buttonon the Axis video server, as described below:Using the Control ButtonFollow the instructions below to reset the Axis video server to the factory default settingsusing the Control Button.1. Switch off the Axis videoserver by disconnectingpower.2. Press and hold the ControlButton while reconnecting thepower.3. Keep the Control buttonpressed until the StatusIndicator displays yellow (thismay take up to 15 seconds).4. Release the Control Button.5. When the Status Indicator changes to Green (may take up to 1 minute), theprocess is complete and the Axis video server has been reset.6. Re-install the Axis video server, as described in the Installation Guide.Control ButtonStatus Indicator
