Axis 250S MPEG-2 User Manual

Also see for 250S Blade: Specifications User manual Installation guide User manual

Axis 250S MPEG-2 User Manual Manual pdf 12 page image

Installing the AXIS 250S AXIS 250S User’s Manual14Accessing the AXIS 250S from Internet ExplorerImportant!Configuring the video source and audio equipmentYou should now configure the connected video source and audio equipment:1. From the administration tools, open the Video settings page.2. Select the physical connector the camera or other equipment is connected to.3. Set the Source modulation to the correct type for your camera. NTSC is the standard inthe United States and PAL is the standard used in Europe. If unsure, check thedocumentation supplied with the camera.4. Open the Audio settings page.5. Select the audio input you connected your equipment to.6. Enable audio, set the desired audio quality, and set the Mic Input Sensitivity accordingto your microphone. Click Save and then return to the Live View page to view thevideo stream.See also the configuration section for audio and video on page 24.Upon delivery, the AXIS 250S is supplied with one pre-configured Administrator user name and pass-word, set to root and pass, respectively. The Administrator password should be changed as soon as pos-sible, to prevent unauthorized access to the setup tools and/or the video stream.❶ Start your browser and enter the IP address of the AXIS250S in the location/address field. The first time the server isaccessed, there will be no need to log in.❷ The Live View page now opens, allow-ing you proceed with the product’s con-figuration by clicking on the Setup link.