Axis 250S MPEG-2 User Manual

Also see for 250S Blade: Specifications User manual Installation guide User manual

Axis 250S MPEG-2 User Manual Manual pdf 34 page image

Administration & System Options AXIS 250S User’s Manual36As well as the log files, the following are also available:• The Server Report - The Server Report displays a listing of important information about theAXIS 250S. If you need to contact the Axis Support desk for help with a problem, please includethis report with your query.• The Parameter List - This link displays a listing of all of the AXIS 250S's parameters and theircurrent settings. This list should also be included when requesting help from the support desk.The Factory Default SettingsIn certain circumstances, it may be necessary to reinstate the Factory Default settings foryour AXIS 250S. This is performed in one of two ways:• By clicking the Restore button from the Maintenance page under System Options. Thisaction will reset most of the unit’s parameters but will save the IP-address, the Subnetmask, the Default Router and the Mac (Ethernet) address.• By pressing the Factory Default Button, located on the front panel. This option will resetALL the parameters currently configured in the unit, i.e. network settings, events, etc.Follow the instructions below to reinstate the product factory default settings using theControl Button:1. Switch off the AXIS 250S by disconnecting the power supply.2. Press and hold the Factory Default Button pressed, and reconnect the power.3. Keep the Factory Default Button pressed until the Status Indicator displays yellow (notethat this may take up to 15 seconds), then release the button. When the Status Indicatordisplays green (which can take up to several minutes) the AXIS 250S will then havebeen reset to its original factory default settings.