Axis 26031R3 User Manual
Also see for Axis 216FD: Installation guideSpecificationsProduct guideUser manualInstallation guide
                                                                 | |
Contents
| 
10 AXIS 216FD - Accessing the CameraSetting the Password1. When accessing the camera for the firsttime, the ‘Configure Root Password’dialog will be displayed on the screen.2. Enter a password and then re-enter it, toconfirm the spelling. Click OK.3. The ‘Enter Network Password’ dialogwill appear. Enter the User name: rootNote: The default administrator user name root is permanent and cannot bedeleted.4. Enter the password as set in step 2 above, and click OK. If the password is lost,the camera must be reset to the factory default settings. See page 44.5. If required, click Yes to install the AXIS Media Control (AMC). You will needadministrator rights on the computer to do this.Accessing the camera from the InternetOnce installed, the camera is accessible on your local network (LAN). To access the camerafrom the Internet you must configure your broadband router to allow incoming data trafficto the camera. To do this, enable the NAT-traversal feature, which will attempt toautomatically configure the router to allow access to the camera. This is enabled fromSetup > System Options > Network > TCP/IP Advanced.For more information, please see NAT traversal (port mapping), on page 38. See also theAXIS Internet Dynamic DNS Service at www.axiscam.net or, for Technical notes on thisand other topics, visit the Axis Support Web at www.axis.com/techsup |
Related manuals for Axis Axis 216FD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine