Axis 26031R3 User Manual

Also see for Axis 216FD: Installation guide Specifications Product guide User manual Installation guide

Axis 26031R3 User Manual Manual pdf 27 page image

27AXIS 216FD - Live View ConfigCheck the Show viewer toolbar box to display e.g. the AXIS Media Control (AMC) or theQuickTime viewer toolbar under the video image in your browser.AMC SettingsThe administrator can disable the installation of the MPEG-4 decoder included with AMC.This is used to prevent the installation of unlicensed copies. Further decoder licenses canbe purchased from your Axis dealer.HTML ExamplesYou can add live video from the AXIS 216FD to your own web site. The camera cantransmit a Motion JPEG stream to up to 20 simultaneous connections, although anadministrator can restrict this to fewer. If MPEG-4 is set as video format, multicasting isused and the video stream will be available for an unlimited number of viewers connectedto the parts of the network where multicast is enabled. Please note that a separate MPEG-4license is required for each viewer.Select the preferred Video Format from the drop down list. The available options areMotion JPEG, MPEG-4 using AMC and MPEG-4 using QuickTime.The Motion JPEG selection has additional settings for Image Type, Image size and otheroptional settings to configure the video stream to suit your Web page.Click Update once satisfied.The camera generates the required source code for your configuration. Copy this code andpaste it into your own Web page code.External VideoThe AXIS 216FD can also display video images from other Axis network cameras andvideo servers, directly on the Live View page. These are known as External Video sources.Once configured, these external video sources are available from the drop-down list on theLive View page.Click the Add button to open the External Video Source Setup dialog, which is used tomake all the necessary settings. Enter the IP address or host name of the external videosource you wish to add. Depending on the external source, select either MPEG-2, MPEG-4or Motion JPEG as the type of video stream to receive.Sequence ModeThe Live View page can be configured to rotate through the internal and selected externalvideo sources, in order, or randomly. Select the desired video sources and enter the time inseconds to display each source (up to 59 minutes). Click Save.The Sequence buttons will appear on the Live View page to enable the viewer to start andstop the sequence mode.