Axis 262 User Manual

18 AXIS 262 - Recording VideoRecording VideoRecording video to the AXIS 262’s hard disk can be scheduled to take place at certaintimes, triggered by an alarm or started manually. For example, if a camera is used tomonitor a workplace, you may want to record video Monday to Friday during work hours,and also have recordings triggered from an incoming signal from an input, when e.g. adoor is opened or motion is detected. You can also start and stop the recording on any ofthe cameras manually from the Main View.The camera selection tab shows if video from the camera is being recorded and whattriggered the recording.Scheduled recordingsYou can configure the times and days when recordings will occur each week. Recordingscan be scheduled to start and stop multiple times on any particular day, e.g. every Tuesdaybetween 10:00-12:45, 14:00-16:15 and 20:30-23:00. Each day of the week can havedifferent schedules or the same time periods can be set for multiple days simultaneously.Schedule a recording1. Click > Schedule in the device’s Web pages.2. Select the camera to configure from the Camera number drop-down list.3. Select the day(s) and then set the start time, end time and frame rate.4. Click Save and repeat for additional schedules.Camera 1: Scheduled recording in progressCamera 2: Alarm recording in progressCamera 3: Manual recording in progressCamera 4: Not recording