Axis 262 User Manual

28 AXIS 262 - Hard DiskHard DiskDisk utilizationThis page shows the current disk utilization and allows you to set the disk space allotted toeach camera for manual/scheduled recording and alarm recording. A new camera is, bydefault, allotted 12 GB of disk space for manual and scheduled recordings and is allotted7 GB of disk space for alarm recordings.Click > Disk Utilization in the device’s Web pages to view and edit how much diskspace is allotted to each camera and to view how much free disk space is left.Note: Recordings may be erased if you reduce the disk capacity allotted to a camera.Overwriting dataWhen the recorded data reaches its storage limit, you can configure whether older recordeddata is overwritten or not. Click > Advanced Overwrite, select the number of thecamera to configure, and then select the ON or OFF radio button for each recording mode.Note: If set to OFF the hard disk can become full and it will not be possible to record any more data for thatcamera.Replacing the hard diskIf the hard disk in the AXIS 262 fails, it can be replaced. A hard disk up to 400 GB can beused, but the recommended size is 160 GB.Note that for the product warranty to be valid:a) the disk must be replaced with the 160 GB replacement disk supplied by Axis(part number 5002-011 ACC HARDDISK 160GB AXIS 262)b) the disk must only be replaced by personnel authorized to do so by Axis.Axis does not guarantee functionality with any other hard disk than the one originallyincluded, or its authorized replacement.Note: If a disk larger than 160 GB is used, the maximum number of users will be decreasedCaution!The electronics of the AXIS 262 can be sensitive to Electrostatic Discharges (ESD). Be sure to take properprecautions when replacing the hard disk, e.g. ground straps, gloves or ESD mats.Make sure the power cable is disconnected before removing the cover to avoid electrical hazards.