Axis 262+ Installation Manual

Also see for 262+: Installation guide Brochure User manual Specifications User manual

Contents

Page 6 AXIS 262+ Installation Guide4. Click Home Page button to access the video recorder’s Web pages.5. See page 7 for instructions on how to set the password.Set the IP address with ARP/Ping1. Acquire an IP address on the same network segment your computer is connected to.2. If already powered up, shut the AXIS 262+ down by pressing the power button on therear panel.3. Locate the serial number (S/N) on the AXIS 262+ label on the rear panel.4. Open a command prompt on your computer and enter the following commands:5. Check that the network cable is connected to the video server. Start the AXIS 262+ bypressing the power button again.6. Close the command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.7. In your browser, type in http:// in the Location/Address field and press Enteron your keyboard.Notes:• Set the IP address with ARP/Ping within 2 minutes of starting the unit.• To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.Windows syntax Windows examplearp -s Address> Number>ping -l 408 -t Address>arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125UNIX/Linux/Mac syntax UNIX/Linux/Mac examplearp -s Address> Number> tempping -s 408 arp -s 192.168.0.125 00:40:8c:18:10:00tempping -s 408 192.168.0.125