Using the AXIS 7100 AXIS 7100 User’s Guide30Specifying a SenderIf the Administrator has enabled the parameter *specify the sender of scanneddocuments, you can identify yourself, your department or organization as thesender of distributed information directly from the AXIS 7100 Control Panel,as follows:1. Press Menu repeatedly until the Sent by: prompt is shown on the messagedisplay.2. Use to select any destination name as the registered sender.Notes:*The parameter specify the sender of scanned documents is set on theadmin | This AXIS 7100 | Edit | User Options page.• This does not apply when user authentication is enabled, as the sender is automatically set tothe logged in user and therefore cannot be changed.• Administrators are referred to Specifying System Settings, on page 21 for information on howto configure normal user privileges.