Axis F44 User Manual

Also see for F44: User manual Installation guide User manual Installation guide User manual

AXIS F44 Main UnitEvents• Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configuredunder System Options > Network > SNMP.• Send Video Clip – Send a video clip to a recipient.• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection duringproduct installation and configuration.Add RecipientsThe product can send media files and messages to notify users about events. Before the product can send media files or notificationmessages, you must define one ore more recipients. For information about available options, see Recipient Types on page 37.To add a recipient:1. Go to Events > Recipients and click Add.2. Enter a descriptive name.3. Select a recipient Type.4. Enter the information needed for the recipient type.5. Click Test to test the connection to the recipient.6. Click OK.Recipient TypesThe following recipients are available:Recipient Use with action NotesEmail Send ImagesSend NotificationSend Video ClipAn email recipient can contain multiple email addresses.FTP Send ImagesSend Video ClipHTTP Send ImagesSend NotificationSend Video ClipHTTPS Send ImagesSend NotificationSend Video ClipEncrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS).Specify login information for the HTTPS server and validatethe server’s certificate. If there is a proxy between the Axisproduct and the HTTPS server, also specify the proxy settings.Network Share Send ImagesSend Video ClipA network share can also be used as a storage device forrecorded video. Go System Options > Storage to configurea network share before setting up a continuous recording oran action rule to record video. For more information aboutstorage devices, see Storage on page 50.TCP Send Notification37