Axis F44 User Manual

Also see for F44: User manual Installation guide User manual Installation guide User manual

AXIS F44 Main UnitSystem OptionsCertificatesCertificates are used to authenticate devices on a network. Typical applications include encrypted web browsing (HTTPS), networkprotection via IEEE 802.1X and secure upload of images and notification messages for example via email. Two types of certificatescan be used with the Axis product:Server/Client certificates - To authenticate the Axis product.CA certificates - To authenticate peer certificates, for example the certificate of an authentication server in case the Axis product isconnected to an IEEE 802.1X protected network.NoteInstalled certificates, except preinstalled CA certificates, will be deleted if the product is reset to factory default. PreinstalledCA certificates that have been deleted will be reinstalled.A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limitedprotection and can be used before a CA-issued certificate has been obtained.To install a self-signed certificate:1. Go to Setup > System Options > Security > Certificates.2. Click Create self-signed certificate and provide the requested information.To create and install a CA-signed certificate:1. Create a self-signed certificate as described above.2. Go to Setup > System Options > Security > Certificates.3. Click Create certificate signing request and provide the requested information.4. Copy the PEM-formatted request and send to the CA of your choice.5. When the signed certificate is returned, click Install certificate and upload the certificate.Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificateand private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:1. Go to Setup > System Options > Security > Certificates.2. Click Install certificate and upload the certificate.Audio SupportSelect Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configureaudio settings, see Set Up Audio on page 25.NoteDeselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.Date & TimeThe Axis product’s date and time settings are configured under System Options > Date & Time.Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (seebelow).To change the date and time settings, select the preferred Time mode under New Server Time:44