Axis M11-E Installation Manual

Also see for M11-E: Installation guide User manual User manual

Contents

AXIS M11-E Network Camera SeriesSpecificationsOperating ConditionsProduct Classification Temperature HumidityAXIS M1124–EAXIS M1125–EIEC 60721-3-4 Class 3M4,Class 4M4IEC/EN 60529 IP66NEMA 250 Type 4X–20 °C to 50 °C(–4 °F to 122 °F)10-100% RH(condensing)Power ConsumptionNONONOTICETICETICEUse a limited power source (LPS) with either a rated output power limited to ≤100 Wor a rated output current limited to ≤5 A.Product DC PoEAXIS M1124–EAXIS M1125–E8–28 V DC Power over Ethernet IEEE802.3af Class 2Cable AreaNONONOTICETICETICE• Use cables that keep within the specified cable area.• Select cables in compliance with your local regulations.• Make sure all cable holes are properly sealed.• Use cable gaskets or cable glands that match both the cable hole and the cable area.Diameter AWGFrom 5 to 15 mm (0.197 to 0.591 in) Approximately from 4 to 6/0To create extra cable holes, open the drill-outs located in the bottom of the housing. See HardwareOverview on page 8.For information about accessories, such as cable gaskets and cable glands that allow for othercable areas, see www.axis.com13ENGLISH