Axis M11-E Installation Manual

Also see for M11-E: Installation guide User manual User manual

Contents

AXIS M11-E Network Camera SeriesThe product can be used with most operating systems and browsers. The recommended browsers are• Internet Explorer® with Windows®• Safari® with OS X® and• ChromeTM or Firefox® with other operating systems.For more information about using the product, see the User Manual available at www.axis.comAdjust Focus and Zoom1. If necessary, remove the top cover of the housing.2. Loosen the lock screw for the focus ring.3. Adjust the focus and zoom by navigating to Setup > Focus on the product’s web page.Follow the instructions in the online help.4. Re-tighten the lock screw for the focus ring.1 2 341 Zoom puller2 Lock screw3 Focus ring4 LensNoteAfter adjusting zoom and focus, if optimal corner focus is not achieved, rotate the entirelens to the factory-set position shown in the illustration above. Then slightly rotate thelens clockwise or counter-clockwise to reach focus in all corners.5. Attach the top cover of the housing.Reset to Factory Default SettingsImportantReset to factory default should be used with caution. A reset to factory default will resetall settings, including the IP address, to the factory default values.22