Axis M11-E Installation Manual

Also see for M11-E: Installation guide User manual User manual

Contents

AXIS M11-E Network Camera SeriesInstall the Wall MountCAUTIONMake sure that the screws and plugs are appropriate for the material (e.g. wood, metal,drywall, stone) and that the material is strong enough to support the combined weightof the camera, housing, and wall mount.Note• See also the wall mount’s Installation Guide supplied in the package and available onwww.axis.com• For technical specifications about the connectors, see the camera’s User Manual availableon www.axis.com1. Prepare the wall for installation of the wall mount. Use the wall bracket as a templateand mark the holes before drilling the holes.2. Route the network cable and, if required, the power cable through the wall bracket.Leave approximately 30 cm (11.8 in) of cable for connecting the camera.3. If connecting an auxiliary device, for example an I/O, audio, or external power device, tothe camera, repeat the step above as applicable to the specific device.4. Fasten the wall bracket to the wall by tightening the screws.Install the Camera in the Housing1. Adjust the position of the holder carefully and then tighten the holder screws (torque0.5 Nm).NONONOTICETICETICETo fulfill the IK10 rating requirements, adjust the holder’s position so that the camera lens(4) is aligned with the housing edge (3), see the illustration.16