Axis M3006–V User Manual
Also see for M3006-V: User manualTechnical specificationsInstallation guideUser manual
                                                     | |
Contents
|
AXIS M3006–V Network CameraSystem OptionsPlain ConfigPlain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from thispage. Help is available from the standard help pages.To open Plain Config, go to System Options > Advanced > Plain Config.Reset to Factory Default SettingsThis will reset all parameters, including the IP address, to the factory default settings:1. Disconnect power from the product.2. Press and hold the Control button and reconnect power (seeHardware Overview on page 4 ).3. Keep the Control button pressed for about 15 seconds until the Status indicator flashes amber.4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). Theproduct has been reset to the factory default settings. The default IP address is 192.168.0.905. Re-assign the IP address.It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.44 |
Related manuals for Axis M3006-V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine