Axis M3006-V User Manual

Also see for M3006-V: User manual Technical specifications Installation guide User manual

AXIS M3006–V Network CameraDetectorsDetectorsCamera TamperingCamera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up.To configure tampering:1. Go to Detectors > Camera Tampering.2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help preventfalse alarms for known conditions that affect the image.3. Select Alarm for dark images if an alarm should be generated if lights are dimmed or turned off, or if the lens is sprayed,covered, or rendered severely out of focus.4. Click Save.To configure the product to send an alarm when tampering occurs:1. Go to Events > Action Rules.2. Click Add to set up a new action rule.3. Enter a Name for the action rule.4. Under Condition, select Detectors from the Trigger list.5. Select Tampering from the list of detectors.6. Optionally, select a schedule and set additional conditions.7. Select the action. To send an email, select Send Notification and select a Recipient from the list of defined recipients.NoteThe While the rule is active option under Duration cannot be used with camera tampering, since camera tampering does nothave a duration and once it has been triggered it will not automatically return to its untriggered state.For more information on actions rules, see Events, on page 29.Motion DetectionMotion detection is used to generate an alarm whenever movement starts or stops in the camera view.Motion detection is configured by defining up to 10 Include and Exclude windows:• Include windows — define areas where motion should be detected• Exclude windows — define areas within an Include window that should be ignored (areas outside Include windowsare automatically ignored).For instructions, see Set Up Motion Detection Windows, on page 26.To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. SeeMotion Detection Parameters, on page 26.Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected.Possible actions include uploading images and start recording. For more information, see Setting Up an Action Rule, on page 30.25bezpeka-shop.com