Axis M3006-V User Manual

Also see for M3006-V: User manual Technical specifications Installation guide User manual

AXIS M3006–V Network CameraAccessing the ProductConfigure Capture ModeCapture mode defines the maximum resolution and maximum frame rate available in the Axis product. The capture mode setting alsoaffects the camera’s angle of view; if using a capture mode with a smaller maximum resolution, the angle of view is reduced.Select the desired capture mode from the drop-down list and click OK.See also Capture Mode, on page 17.Set Power Line FrequencyPower line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 43)or by resetting the product to factory default.Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may causeimage flicker if the product is used in fluorescent light environments.When using 50 Hz, the maximum frame rate is limited to 25 fps.NotePower line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts ofthe world use 50 Hz. Local variations may apply, always check with the local authorities.The Live View PageThe controls and layout of the Live View page may have been customized to meet specific installation requirements and userpreferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live Viewpage. The following provides an overview of each available control.8bezpeka-shop.com