AXIS M3006–V Network CameraSystem OptionsUploaded files are accessed through http:// address>/local// name> where is theselected user group (viewer, operator or administrator) for the uploaded file.Plain ConfigPlain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from thispage. Help is available from the standard help pages.To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance.Reset to Factory Default SettingsImportantReset to factory default should be used with caution. A reset to factory default will reset all settings, including the IPaddress, to the factory default values.To reset the product to the factory default settings:1. Disconnect power from the product.2. Press and hold the control button and reconnect power. See Hardware Overview, on page 4 .3. Keep the control button pressed for about 15 seconds until the status LED indicator flashes amber.4. Release the control button. The process is complete when the status LED indicator turns green. The product has been resetto the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.905. Use the tools provided on the Installation and Management Software CD to assign an IP address, set the password andaccess the video stream. This information is also available from the support pages on www.axis.com/techsupIt is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.43bezpeka-shop.com
