Axis M3025–VE User Manual

Also see for AXIS M3025-VE: Manual Installation guide Installation guide

AXIS M3025–VE Network CameraSetting Up the ProductImageThe default image settings can be configured under Video> Video Stream. Select the Image tab.The following settings are available:• Resolution. Select the default resolution.• Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower thecompression, the higher the image quality with higher bandwidth requirements and larger file sizes.• Rotate image. If required, the image can be rotated.• Mirror. If required, the image can be mirrored.• Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixedamount. Alternatively, the frame rate can be set as Unlimited, which means the Axis product always delivers the highestframe rate possible under the current conditions.• Overlay settings. See Overlay, on page 19.Click Save to apply the new settings.H.264H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereasP-frames only contain the differences from previous frames.The GOV length is the number of frames between two consecutive I-frames. Increasing the GOV length may save considerably onbandwidth requirements in some cases, but may also have an adverse affect on image quality.The Axis product supports two H.264 profiles. The Main profile provides higher compression than the Baseline profile with the samevideo quality, but requires more processing power to decode.The bit rate can be set as Variable Bit Rate (VBR) or Constant Bit Rate (CBR). VBR adjusts the bit rate according to the imagecomplexity, using up more bandwidth for increased activity in the image, and less for lower image activity. CBR allows you to set afixed Target bit rate that consumes a predictable amount of bandwidth. As the bit rate would usually need to increase for increasedimage activity, but in this case cannot, frame rate and image quality are affected negatively. To partly compensate for this, it ispossible to prioritize either frame rate or image quality. Not setting a priority means that frame rate and image quality are equallyaffected. You must save your settings before they can take effect.The current bit rate can be set to appear as text overlay. To do this, select the Include text check box option under OverlaySettings and enter the modifier #b in the field.MJPEGSometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control thebandwidth and storage used by the Motion JPEG video stream in these situations. Setting the frame size to the Default settingprovides consistently good image quality at the expense of increased bandwidth and storage usage in low light. Limiting the framesize optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,the maximum frame size should be set to an optimal value.Stream ProfilesA stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Streamprofiles can be used:• When setting up recording using action rules. See Events, on page 31.• When setting up continuous recording. See Continuous Recording, on page 35.17