Axis M3025–VE User Manual

Also see for AXIS M3025-VE: Manual Installation guide Installation guide

AXIS M3025–VE Network CameraSystem OptionsConnection List - Lists all clients that are currently accessing media streams.Crash Report - Generates an archive with debugging information. The report takes several minutes to generate.The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Configuration.The Access Log can be configured to list all connections to the product (select Critical, Warnings & Info).AdvancedScriptingScripting allows experienced users to customize and use their own scripts.NOTICENOTICENOTICEImproper use may cause unexpected behavior and loss of contact with the Axis product.Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provideassistance for problems with customized scripts.To open the Script Editor, go to System Options > Advanced > Scripting. If a script causes problems, reset the product to itsfactory default settings, see page 47.For more information, see www.axis.com/developerFile UploadFiles, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, goto System Options > Advanced > File Upload.Uploaded files are accessed through http:// address>/local// name> where is theselected user group (viewer, operator or administrator) for the uploaded file.Plain ConfigPlain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from thispage. Help is available from the standard help pages.To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance.Reset to Factory Default SettingsImportantReset to factory default should be used with caution. A reset to factory default will reset all settings, including the IPaddress, to the factory default values.NoteThe installation and management software tools are available on the CD supplied with the product and from the supportpages on www.axis.com/techsupTo reset the product to the factory default settings:1. Disconnect power from the product.2. Press and hold the control button and reconnect power. See Hardware Overview, on page 5 .3. Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.47