Axis M3025–VE User Manual

Also see for AXIS M3025-VE: Manual Installation guide Installation guide

AXIS M3025–VE Network CameraEvents• Time- Recurrence – Trigger the rule periodically. SeeRecurrences, on page 33. This can for example be used to uploadan image every 5 minutes.- Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 33.Available actions include:• Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).• Output Port – Activate an I/O port to control an external device.• PTZ Control- Preset Position – Go to a preset position.• Record Video – Record video to a selected storage.• Send Images – Send images to a recipient.• Send Notifications – Send a notification message to a recipient.• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection duringproduct installation and configuration.Setting Up an Action RuleAn action rule defines the conditions that must be met for the product to perform an action, for example record video or send anemail notification. If multiple conditions are defined, all of them must be met to trigger the action.The following example describes how to set up an action rule to record video to a network share if there is movement in thecamera’s field of view.Set up motion detection and add a network share:1. Go to Detectors > Motion Detection and configure a motion detection window. See page 272. Go to System Options > Storage and set up the network share. See page 45.Set up the action rule:1. Go to Events > Action Rules and click Add.2. Select Enable rule and enter a descriptive name for the rule.3. Select Detectors from the Trigger drop-down list.4. Select Motion Detection from the drop-down list. Select the motion detection window to use.5. Optionally, select a Schedule and Additional conditions. See below.6. Under Actions, select Record Video from the Type drop-down list.7. Select a Stream profile and configure the Duration settings as described below.8. Select Network Share from the Storage drop-down list.To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from beingtriggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the triggershould be ignored before the action rule can be activated again.32