Axis M5075-G User Manual

Also see for M5075-G: Installation guide User manual

AXIS M5075-G PTZ CameraConfigure your device2. Go to Settings > PTZ > Limits and set the limits as needed.View and record videoThis section includes instructions about configuring your device. To learn more about how streaming and storage works, go toStreaming and storage on page 23.Reduce bandwidth and storageImportantReducing the bandwidth can result in loss of details in the image.1. Go to Video > Stream.2. Click in the live view.3. Select Video format H.264.4. Go to Video > Stream > General and increase Compression.5. Go to Video > Stream > H.264 and H.265 encoding and do one or more of the following:- Select the Zipstream level that you want to use.NoteThe Zipstream settings are used for both H.264 and H.265.- Turn on Dynamic FPS.- Turn on Dynamic GOP and set a high Upper limit GOP length value.NoteMost web browsers don’t support H.265 decoding and because of this the camera doesn’t support it in its web interface.Instead you can use a video management system or application that supports H.265 decoding.Set up network storageTo store recordings on the network, you need to set up your network storage.1. Go to System > Storage.2. Click Add network storage under Network storage.3. Type the IP address of the host server.4. Type the name of the shared location on the host server under Network share.5. Type the username and password.6. Select the SMB version or leave it on Auto.7. Select Add share even if connection fails if you experience temporary connection issues, or if the share is not yetconfigured.8. Click Add.11