Axis M5075-G User Manual

Also see for M5075-G: Installation guide User manual

AXIS M5075-G PTZ CameraLearn more1. Go to Settings > System > Z-Wave.2. Go to Device management and click . The product starts looking for Z-Wave devices in the Z-Wave network.3. Set the Z-Wave device to be removed into inclusion/exclusion mode as described in its User Manual.4. Wait until the removal process is finalized as indicated by a notification on the web page.The Z-Wave device is now removed from the device management list.NoteAll product-related information in the removed Z-Wave device is deleted.NoteIf the Z-Wave device is not found, the removal process is terminated automatically.Remove a Z-Wave device through forced processThere may be a communication fail, for example due to drained battery, so you may not be able to remove the Z-Wave device bysetting it to inclusion/exclusion mode. You can perform a forced removal of a Z-Wave device that shows status Down in thedevice management list.1. Go to Settings > System > Z-Wave.2. Go to Device management and expand the device information for the Z-Wave device to be removed.3. Go to Node > Status and click .4. Wait until the exclusion process is finalized as indicated by a notification on the web page.The Z-Wave device is now removed from the device management list.NoteAll product-related information in the removed Z-Wave device is retained.Remove a Z-Wave device from the SmartStart listNoteA Z-Wave device will not be removed from the device management list if you remove it from the SmartStart list.1. Go to Settings > System > Z-Wave.2. Go to SmartStart.3. Click next to the Z-Wave device to be removed from the SmartStart list.Replace a Z-Wave deviceThere may be a communication fail, for example due to a faulty Z-Wave device, and you want to replace the device with another one.You can perform a forced replacement of a Z-Wave device that shows status Down in the device management list.1. Go to Settings > System > Z-Wave.2. Go to Device management and expand the device information for the Z-Wave device to be replaced.3. Go to Node > Status and click . The product starts looking for Z-Wave devices in the Z-Wave network.4. Set the Z-Wave device that is to replace the existing device into inclusion/exclusion mode as described in its User Manual.22