Axis M7001 User Manual

Also see for M7001: Datasheet Installation guide Installation guide

23AXIS M7001 - Pan Tilt ZoomAdvancedDevice SettingsThe device settings window is for driver-specific settings, so the appearance of this window can vary depending on the driverinstalled. Options that can be configured include: Driver Specific Settings for Video Source 1, Mechanical Limits for MovingVideo Source 1, Light Control for Video Source 1 and Extended Driver Specific Settings for Video Source 1.Note:For download and installation information about PTZ drivers for your Axis product please visit www.axis.comControlsDriver-specific Panel Shortcut Command Buttons can be created to provide direct access to auxiliary commands provided bythe PTZ driver. The buttons will be displayed in the PTZ control panel which is opened by clicking Ctrl Panel on the Live Viewpage.The pan, tilt, zoom, focus and iris controls can be disabled by unchecking the boxes under Enable/Disable controls.See also PTZ Controls, on page 25, and Control panel, on page 26.LimitsDefine the pan, tilt, zoom and focus limits. Movements to the left and right, up and down can be restricted to narrow the areaunder surveillance. The near focus limit can be set to avoid focusing on objects too close to the camera.Note:To be able to set limits, the driver needs to be an “absolute” driver.OSD MenuIf the PTZ unit supports an internal configuration menu, the menu can be accessed using the On-Screen Display (OSD).Configure the analog camera by opening and navigating through its internal menu in this page.Note:The error “503 service unavailable” occurs if another user is accessing a different Motion JPEG stream configuration,for example via the Live View page. Only one Motion JPEG configuration is available at a time.