AXIS M7011 Video EncoderRecordings2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button toapply the filters. See also Find Recordings on page 38.3. Select the recording and click Play. The recording will be played in a new browser window.Export Video ClipNoteThe exported recording is a Matroska video file (.mkv). To play the recording in Windows Media Player, AXIS Matroska FileSplitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/softwareTo export a video clip, follow these steps:1. Go to Recordings > List.2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button toapply the filters. See also Find Recordings on page 38.3. Select the recording and click Export. The Export Recording dialog opens.4. By default, the complete recording is selected. To export a part of the recording, modify the start and stop times.5. Optionally, enter a file name for the recording.6. Click Export.NoteRecordings can also be exported from the playback window.Continuous RecordingThe Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storageon page 49. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings.If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and anew recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until theyare removed manually or through automatic removal of old recordings.To start a continuous recording, follow these steps:1. Go to Recordings > Continuous.2. Select Enabled.3. Select the type of storage device from the Storage list.4. Select a Stream profile to use for continuous recordings.5. Click Save to save and start the recording.39