Axis M7011 User Manual

Also see for M7011: Installation guide User manual

AXIS M7011 Video EncoderSystem OptionsA Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limitedprotection and can be used before a CA-issued certificate has been obtained.To install a self-signed certificate:1. Go to Setup > System Options > Security > Certificates.2. Click Create self-signed certificate and provide the requested information.To create and install a CA-signed certificate:1. Create a self-signed certificate as described above.2. Go to Setup > System Options > Security > Certificates.3. Click Create certificate signing request and provide the requested information.4. Copy the PEM-formatted request and send to the CA of your choice.5. When the signed certificate is returned, click Install certificate and upload the certificate.Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificateand private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:1. Go to Setup > System Options > Security > Certificates.2. Click Install certificate and upload the certificate.Date & TimeThe Axis product’s date and time settings are configured under System Options > Date & Time.Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (seebelow).To change the date and time settings, select the preferred Time mode under New Server Time:• Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date andtime are set once and will not be updated automatically.• Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings areupdated continuously. For information on NTP settings, see NTP Configuration on page 46.If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 45.• Set manually – Allows you to manually set date and time.If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight savingtime changes.The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use thepredefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date andtime formats. To include date and time in the overlay text, go to Video and select Include date and Include time.NetworkBasic TCP/IP SettingsThe Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled.43