AXIS M7014DetectorsDetectorsCamera TamperingCamera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up.To configure tampering:1. Go to Detectors > Camera Tampering.2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help prevent falsealarms for known conditions that affect the image.3. Select Alarm for dark images if an alarm should be generated if lights are dimmed or turned off, or if the lens is sprayed,covered, or rendered severely out of focus.4. Click Save.To configure the product to send an alarm when tampering occurs:1. Go to Events > Action Rules.2. Click Add to set up a new action rule.3. Enter a Name for the action rule.4. Under Condition, select Detectors from the Trigger list.5. Select Tampering from the list of detectors.6. Select the video channel.7. Optionally, select a schedule and set additional conditions.8. Select the action. To send an email, select Send Notification and select a Recipient from the list of defined recipients.NoteThe While the rule is active option under Duration cannot be used with camera tampering, since camera tampering does nothave a duration and once it has been triggered it will not automatically return to its untriggered state.For more information on actions rules, see Events, on page 24.Motion DetectionMotion detection is used to generate an alarm whenever movement occurs (or stops) in the view. Up to 10 Include and Excludewindows can be configured:• Include windows — target specific areas within the whole video image• Exclude windows — define areas within an Include window that should be ignored (areas outside Include windowsare automatically ignored)Once configured, motion detection windows appear in the list of Detectors in Action rule setup. See Setting up an Action Rule, onpage 24.NoteUsing the motion detection feature may decrease the product’s overall performance.22