Axis P3346 User Manual

Also see for P3343-VE: Datasheet Installation guide User manual Installation guide Installation guide

43AXIS P33 Series - System OptionsThere are four types of traps available for the network camera.• Cold start• Warm start• Link up• Authentication failedSNMP v3SNMP v3 - provides encryption and secure passwords. HTTPS must be enabled. To use traps with SNMP v3 an SNMP v3management application is required.If the Enable SNMP v3 option is enabled, provide the Initial user password. Note that the initial password is activated onlywhen HTTPS is enabled and can only be set once.If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.When SNMP configuration is ready, click Save to use the new settings or Reset to return to the default values.UPnP™The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automaticallydetected by operating systems and clients that support this protocol.RTPRTP/ H.264 - These settings are the port range, IP address, port number (video), and Time-To-Live value to use for the videostream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. Formore information, please see the online help .BonjourThe network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systemsand clients that support this.