Axis P5512 User Manual

Also see for P5512: User manual Datasheet User manual Installation guide Installation guide

AXIS P5512 PTZ Dome Network CameraEvents- System Ready – Trigger the rule when the product has been started and all services are running. This can forexample be used to send a notification when the product restarts.• Time- Recurrence – Trigger the rule periodically. SeeRecurrences, on page 38. This can for example be used to uploadan image every 5 minutes.- Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 38.Available actions include:• Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).• Output Port – Activate an I/O port to control an external device.• Overlay Text – Display an overlay text. SeeUsing Overlay Text in an Action Rule, on page 22.• Play Audio Clip – See Audio Clips, on page 24.• PTZ Control- Preset Position – Go to a preset position.- Guard Tour – Start a guard tour. SeeGuard Tour, on page 29.• Record Video – Record video to a selected storage.• Send Images – Send images to a recipient.• Send Notifications – Send a notification message to a recipient.• Send Video Clip – Send a video clip to a recipient.Setting Up an Action RuleAn action rule defines the conditions that must be met for the product to perform an action, for example record video or send anemail notification. If multiple conditions are defined, all of them must be met to trigger the action.The following example describes how to set up an action rule to record video to a network share if there is movement in thecamera’s field of view.Set up motion detection and add a network share:1. Go to Detectors > Motion Detection and configure a motion detection window. See page 312. Go to System Options > Storage and set up the network share. See page 49.Set up the action rule:1. Go to Events > Action Rules and click Add.2. Select Enable rule and enter a descriptive name for the rule.3. Select Detectors from the Trigger drop-down list.4. Select Motion Detection from the drop-down list. Select the motion detection window to use.5. Optionally, select a Schedule and Additional conditions. See below.6. Under Actions, select Record Video from the Type drop-down list.7. Select a Stream profile and configure the Duration settings as described below.8. Select Network Share from the Storage drop-down list.36