Axis P5512 User Manual

Also see for P5512: User manual Datasheet User manual Installation guide Installation guide

AXIS P5512 PTZ Dome Network CameraHardware OverviewConnectors and ButtonsFor technical specifications, see page 59.Network ConnectorRJ45 Ethernet connector. Supports Power over Ethernet (PoE).NOTICENOTICENOTICEThe product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switchshall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. Forinformation about regulatory requirements, see Regulatory Information, on page 2 .Multi-connectorTerminal connector for connecting external equipment:• Audio equipment• Input/Output (I/O) devices• AC/DC power supplyWhen connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IPrating. For more information, see Multi-Connector Cable (sold separately), on page 53.SD Card SlotAn SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications.NOTICENOTICENOTICETo prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > SystemOptions > Storage > SD Card and click Unmount.Control ButtonThe control button is used for:• Resetting the product to factory default settings. See page 51.• Connecting to an AXIS Video Hosting System service. See page 45. To connect, press and hold the button for about 1second until the Status LED flashes green.• Connecting to AXIS Internet Dynamic DNS Service. See page45. To connect, press and hold the button for about 3 seconds.Restart ButtonPress the restart button to restart the product.7