Axis P5522 Installation Manual

Also see for DROP CEILING P5522-E: Installation guide User manual Datasheet User manual Preventive Maintenance Instructions and Checklist

Contents

AXIS P5522-E Installation Guide Page 9ENGLISHInstall the network camera1. Install the selected bracket (not included)according to the instructions supplied with thebracket. If drilling is required, make sure to usedrill bits, screws, and plugs that are appropriatefor the material. See www.axis.com for infor-mation on available mounting accessories.2. Route the network cable and attach thesupplied RJ45 connector. Refer to theinstructions provided with the connector forinformation on wiring and assembly.3. Hook the camera to the safety wire on thebracket.4. Connect the network cable and RJ45 connector to the network connector on the camera.5. Install AXIS T8123, see Install AXIS T8123 High PoE Midspan 1-port, on page 10.6. Check that the indicator LEDs on the midspan indicate the correct conditions, see the table onpage 11 for further details.7. Slide the unit holders on the camera into the slots on the bracket and rotate the camera unit.8. Secure the network camera to the mounting bracket by fastening the 3 screws (Torx T30).! IMPORTANT!The supplied RJ45 connector or a compatible, IP66 rated RJ45 connector must be used in order tocomply with the IP66 rated design of the camera.Wall bracket (mounting example, bracket not included)SafetywireSlots forScrewsTorx T30unit holders