Axis P5532 PTZ User Manual

Also see for AXIS P5532 PTZ: User manual Datasheet

AXIS P5532 PTZ Dome Network CameraAccessing the productActivate the product’s fan with this button. Enable this button from Live View Config > Action Buttons. The Fanbutton is activated automatically. Press this button to activate it manually.Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. See page 25 for more informationabout Gatekeeper.AXIS Media Control viewer toolbarThe AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 12 for moreinformation. The toolbar displays the following buttons:The Play button connects to the Axis product and starts playing a media stream.The Stop button stops the media stream.The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specifiedin the AMC Control Panel.Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computerkeyboard to cancel full screen view.The Record button is used to record the current video stream. The location where the recording is saved can be specifiedin the AMC Control Panel.AMC Audio controlsAMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible whenaudio is enabled.Speaker button — Click to turn the speakers on or off.Microphone button – Click to mute or unmute the microphone. In Simplex - Network Camera speaker only mode,click this button to stop sending audio to the product.Use the slider to control the volume of the speakers and the microphone.Half-duplex modeThe Talk/Listen button is used to switch between sending and receiving audio. The button can be configuredfrom the Audio tab in the AMC Control panel:• Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.• Toggle mode: Click once to switch between talking and listening.Simplex – Network Camera speaker only modeTo send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audiotransmission.PTZ ControlsThe Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users underSystem Options > Security > Users.With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request orrelease control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.10