Axis P5532 PTZ User Manual

Also see for AXIS P5532 PTZ: User manual Datasheet

AXIS P5532 PTZ Dome Network CameraPTZ (Pan Tilt Zoom)When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximumpan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This isuseful then the view is zoomed in on an object.When Enable Auto-flip is selected, the Axis product will simulate continuous pan movement in the same direction, i.e. the camerawill pan the full 360 degrees, even though there is a mechanical stop at ±180 degrees.When Enable movement prediction is selected, the Axis product will attempt to predict the new position in the pan movement, aftercompensating for the slight delay while the camera changes direction after an auto-flip. This is useful for tracking moving objects orpersons when using the joystick or emulated joystick mode.See the online help for more information.ControlsPanel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX® ApplicationProgramming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page throughthe Ctrl panel button, see page 10.Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.NoteDisabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move topreset positions that require a tilt movement.Control QueueThe administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttonsappear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.A user who belongs to a group (see Users, on page 37) with a higher PTZ priority can go before other users in the queue andtake control of the product. The order of priority is as follows:1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will beremoved from the queue 60 seconds after the last PTZ control command.2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page 31).The event will immediately be placed first in the queue except when an administrator is in control.3. Operator — Same as administrator but with lower priority4. Guard Tour — A guard tour (see page 26) has PTZ control for an indefinite period of time. It may be overridden by anoperator, event or administrator. The guard tour will resume when higher priority groups leave the queue.5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passedon to the next viewer in queue.Note• The administrator can enable and disable PTZ controls for selected users.• To identify different users in the viewer group, cookies must be enabled on the client.27