Axis P5532 PTZ User Manual

Also see for AXIS P5532 PTZ: User manual Datasheet

AXIS P5532 PTZ Dome Network CameraAccessing the productNote• The default administrator user name root is permanent and cannot be deleted.• If the password for root is lost, the product must be reset to the factory default settings. See Reset to factory defaultsettings, on page 46.The Live View pageIf the Axis product has been customized to meet specific requirements, not all the items described below will appear in the Live Viewpage. The following provides an overview of each available button.Controls on the Live View pageThe Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Streamprofiles are configured under Video & Audio > Stream Profiles. See Stream Profiles, on page 17.Click Pulse to activate the output for a defined period of time, such as switching on an external light for 20 seconds.Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch an external lighton and off.The Manual Trigger button can trigger an event directly from the Live View page. The button is configured underLive View Config > Action Buttons.Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on yourcomputer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available.Enable this button from Live View Config > Action Buttons.The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audioclip and click the Play button.9