Axis PrintPoint 140 BJC User Manual
Also see for 140 BJC: Quick installation guide
                                                                                     | |
Contents
| 
Section 2: Basic InstallationAXIS PrintPoint 140 BJC User’s Manual 15Connecting Printers to the AXIS PrintPoint 140 BJCCaution 0 Make sure that the external power supply is marked with the correctmains voltage.Connect a Printer: 1. Switch off the printer.2. Connect the AXIS PrintPoint 140 BJC to the printer, eitherdirectly to the parallel printer port, or using the optional velcroribbons and printer cable extension.3. Connect the external power supply to the AXIS PrintPoint 140BJC. The Power Indicator should now be permanently lit and theNetwork Indicator will start to flash during the power up and selftest routines. The AXIS PrintPoint 140 BJC is ready for use whenthe Network Indicator stops flashing and remains off.Test the Connection: 1. Switch on the printer.2. Press and release the test button on the AXIS PrintPoint 140 BJCto print a test page.The test page shows the most important parameters as well as thefirmware version number. For some types of printers, the printer’sinternal test page will be printed instead of the print server’s test page.However, all you need to be concerned with at this stage is whetherthe test page has printed satisfactorily or not. |
Related manuals for Axis 140 BJC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine