Section 4: Setting Up - WindowsAXIS PrintPoint 140 BJC User’s Manual 51Windows NT - LPD PrintingWindows NT Serverversion 4.0This section describes how to set up a Windows NT Server v4.0 forLPR printing over the TCP/IP protocol.Basic Setup If you have not already done so, you should perform the TCP/IP basicsetup procedures prior to installing a printer for LPD printing. Theseprocedures are defined inBasic Set Up for TCP/IP, on page 22.Preparing forLPR/LPD printingIn the Control Panel, click the Network icon. If the TCP/IP Printingentry appears, then TCP/IP is already installed. Close the Networkfolder and skip to Installing a printer below.Follow these steps to prepare for LPR/LPD printing:1. Open the Control Panel and click the Network icon.2. Select Protocols.3. Add TCP\IP Protocol.4. Select Services.5. Add MS TCP\IP Printing.
