Axis PrintPoint 140 BJC User Manual

Also see for 140 BJC: Quick installation guide

Contents

Axis PrintPoint 140 BJC User Manual Manual pdf 72 page image

Appendix B: The Parameter ListAXIS PrintPoint 140 BJC User’s Manual 71The Config FileThe remainder of this appendix contains the complete AXISPrintPoint 140 BJC parameter list. The left-hand column shows theparameters and their default values as they appear in the config file,and the right column contains brief descriptions of the parameters.Most parameters will take effect in the print server for the nextincoming print job after being changed. However, those parametersmarked (Requires Restart), will require the print server to be restartedbefore the new parameter setting can take effect.Please note that the password relates to parameters, e.g.ROOT_PWD, will only be shown when logged in as root, i.e. notwhen printing the parameters using the Test button.--- CONFIG MENUNODE_ADDR. : 00 40 8C 10 00 86 Node AddressBASE URL. : WWW.AXIS.COM Default Base URL AddressROOT_PWD. : pass Root Password--- TCP/IP MENUTCP_ENB. : YES TCP/IP Protocol EnabledINT_ADDR. : 0 0 0 0 Internet AddressDEF_ROUT. : 0 0 0 0 Default Router Address (0.0.0.0 for no router)NET_MASK. : 0 0 0 0 Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)LPD_BANN. : OFF LPD Banner Page DisabledDHCP_ENB. : NO DHCP Protocol EnabledBOOTP_ENB. : YES BOOTP Protocol EnabledRARP_ENB. : YES RARP Protocol Enabled--- NETWARE MENUNETW_ENB. : YES NetWare Protocol EnabledPS_NAME. : AXIS100086 Print Server Name (100086 are the last six digits of the serial number)JOB_CHECK_DELAY. : 5 Print Server queue polling intervalCONF_CHECK_DELAY. : 300 Interval between automatic configuration checksFR_802_3. : YES IEEE 802.3 Frame Type EnabledFR_ETH_2. : YES Ethernet II Frame Type EnabledFR_802_2. : YES IEEE 802.2 Frame Type EnabledFR_SNAP. : YES SNAP Frame Type EnabledNCP_BURST_MODE. : YES NetWare Burst Mode Enabled (Requires Restart)PSERVER_NDS. : File server & Name of print server (including context)PSERVER_BINDERY1. : Bindery file server namePSERVER_BINDERY2. : Bindery file server name