Axis Q1615 Mk II Installation Manual

Also see for q1615 MK II: Installation guide User manual

AXIS Q1615 Mk II Network Camera10 Iris connector11 Power connector12 Power LED indicator13 Network LED indicator14 RS485/RS422 connectorLED IndicatorsNote• The Status LED can be configured to be unlit during normal operation. To configure,go to Settings > System > Plain config.• The Status LED can be configured to flash while an event is active.• The Status LED can be configured to flash for identifying the unit. Go to Settings >System > Plain config.Status LED IndicationGreen Steady green for normal operation.Amber Steady during startup. Flashes when restoring settings.NoteThe Network LED can be disabled so that it does not flash when there is network traffic. Toconfigure, go to Settings > System > Plain config.Network LED IndicationGreen Steady for connection to a 100 Mbit/s network. Flashes fornetwork activity.Amber Steady for connection to a 10 Mbit/s network. Flashes fornetwork activity.Unlit No network connection.NoteThe Power LED can be configured to be unlit during normal operation. To configure, go toSettings > System > Plain config.Power LED IndicationGreen Normal operation.Amber Flashes green/amber during firmware upgrade.11EN