Axis Q1615 Mk II Installation Manual

Also see for q1615 MK II: Installation guide User manual

AXIS Q1615 Mk II Network CameraStatus LED behavior for focus assistantNoteOnly valid for optional P-iris, DC-iris or manual iris lenses.The status LED flashes when the Focus Assistant is active.Color IndicationRed The image is out of focus.Adjust the lens.Amber The image is close to focus.The lens needs fine tuning.Green The image is in focus.Buzzer signal for focus assistantNoteOnly valid for optional P-iris, DC-iris or manual iris lenses.Buzzer LensFast interval Optimally adjustedMedium interval Less optimally adjustedSlow interval Poorly adjustedStatus LED behavior and buzzer signal for leveling assistantFor information on the function button used for leveling the camera, see .Press and hold the function button (2) for more than two seconds to level the camera.• When the camera is level, both LEDs are steady green, and the beep is continuous.• When the camera is not level, the LEDs flash a combination of red, green and orange, andthe beep occurs at slow intervals.Both LEDs briefly flash green to indicate that the leveling is getting better.Connectors and buttonsFor specifications and operating conditions, see page 16.Network connectorRJ45 Ethernet connector with Power over Ethernet (PoE).12