Axis Q1615 Mk II Installation Manual

Also see for q1615 MK II: Installation guide User manual

AXIS Q1615 Mk II Network CameraSafety instructionsNONONOTICETICETICE• The Axis product shall be used in compliance with local laws and regulations.• Axis recommends using a shielded network cable (STP).• Axis recommends using a network cable of category CAT5e or higher.• To use the Axis product outdoors, or in similar environments, it shall be installed in anapproved outdoor housing.• Store the Axis product in a dry and ventilated environment.• Avoid exposing the Axis product to shocks or heavy pressure.• Do not install the product on unstable poles, brackets, surfaces or walls.• Use only applicable tools when installing the Axis product. Using excessive force withpower tools could cause damage to the product.• Do not use chemicals, caustic agents, or aerosol cleaners.• Use a clean cloth dampened with pure water for cleaning.• Use only accessories that comply with the technical specification of your product. Thesecan be provided by Axis or a third party. Axis recommends using Axis power sourceequipment compatible with your product.• Use only spare parts provided by or recommended by Axis.• Do not attempt to repair the product yourself. Contact Axis support or your Axis resellerfor service matters.• The power supply shall be plugged in to a socket outlet installed near the product andshall be easily accessible.• Use a limited power source (LPS) with either a rated output power limited to ≤100 W or arated output current limited to ≤5 A.TransportationNONONOTICETICETICE• When transporting the Axis product, use the original packaging or equivalent to preventdamage to the product.BatteryThe Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-timeclock (RTC). Under normal conditions this battery will last for a minimum of five years.Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether(EGDME), CAS no. 110-71-4.8