Axis USB Wireless G User Manual

Also see for OfficeBasic USB Wireless G: Installation guide

Mac OS Setup18 AXIS OfficeBasic USB Wireless GChoosing a PrinterSelecting a Printer The method for choosing a printer varies depending on which version ofLaserWriter printer driver you are using.• The LaserWriter 7.0 driver assumes that you use a standard PostScriptdriver, and cannot take advantage of any printer specific features.• The LaserWriter 8.0 driver uses PPD files that contain printer descriptions.This gives you full control over any features your printer might have.LaserWriter 7.0Printer DriverFollow the instructions below to choose a printer:1. Select Chooser from the Apple menu.2. Click the LaserWriter icon.3. If your network has more than one zone, click on the zone you want. (If yournetwork does not have any zones, this box will not appear.)4. Click the name of the printer you want — the ports are shown as name>_. Example: AX100086_USB.5. Click the Close box. This completes the configuration and closes the Chooser.Repeat this procedure for each Macintosh computer on the network using theprint server.LaserWriter 8.0Printer DriverFollow the instructions below to choose a printer:1. Select Chooser from the Apple menu.2. Click the LaserWriter 8.0 icon.3. If your network has more than one zone click on the zone you want. (If yournetwork does not have any zones, this box will not appear.)4. Click the name of the printer you want — the ports are shown as name>_. Example: AX100086_USB.5. Click Setup... , select the PPD file that matches your printer and click OK.If your printer does not appear in the PPD file list, please contact your printervendor. Use the Generic PPD if you do not need any printer specific features.6. Click OK, and then click the Close box. This completes the configuration andcloses the Chooser.Repeat this procedure for each Macintosh computer on the network using theprint server.