Axis USB Wireless G User Manual

Also see for OfficeBasic USB Wireless G: Installation guide

Print Server ManagementAXIS OfficeBasic USB Wireless G 27MaintenanceFactory Default Click Factory Default then OK to reload all default settings in the print server.Firmware Upgrade Click Firmware Upgrade to browse to your firmware directory and reload theprint server with new firmware. (You must first download firmware fromwww.axis.com/techsup/firmware, select the appropraite print server modeland click Download flash file. Save the firmware flash file locally on yourcomputer or in a network directory.)RestartClick OK to restart the print server. The print server can also be restarted bydisconnecting and the re-connecting the external power supply, or by pushingthe external Reset button once.• Performing a Factory Default will erase all settings of the print server todefault and should be performed with caution!• After performing a Factory Default, the default wireless settings will be:• Infrastructure mode• SSID = (will connect with the Access Point that has the bestsignal in your wireless network)• Data transmit rate = Auto• Transmit mode = Auto• Authentication Type = Open System• Channel = 6• DHCP enabled