BALAY 3VN300BD Instruction Manual

Also see for 3VN300BD: Instructions

BALAY 3VN300BD Instruction Manual Manual pdf 18 page image

en18The majority of faults which could occur indaily operation can be rectified by theuser. This ensures that the appliance isquickly available for use again. Thefollowing overview will help you locatingthe causes and gives helpful advise toeliminate them.NoteIf the appliance stops during dishwashingor does not start for no obvious reason,first run the Abort programme function(Reset).(See chapter entitled “Dishwashing”)ã=WarningDon’t forget: Repairs may be carried outby technicians only. If a component has tobe replaced, ensure that only originalspare parts are used. Improper repairs oruse of non-original spare parts may causeconsiderable damage and put the user atconsiderable risk.Waste water pumpLarge food remnants in the rinsing waternot retained by the filters may blockthe waste water pump. The rinsing wateris then not pumped out and coversthe filter.In this case:– First disconnect the appliance fromthe power supply.– Remove the filters 1J.– Scoop out water, use a sponge ifrequired.– Loosen screw on the cover (Torx T 20)and remove the cover.– Check inner compartment and removeany foreign objects.– Re-insert cover and screw tight.– Re-insert the filters and screw tight.... when the appliance isswitched onThe appliance does not start.– The mains fuse has tripped.– The appliance plug has not beeninserted.– The appliance door has not been shutproperly.Troubleshooting