Device ConfigurationAccess Management – CWMP (TR069) 105BEC 6300VNL User ManualCWMP (TR-069)CWMP, short for CPE WAN Management Protocol, also called TR069 is a Broadband Forum technicalspecification entitled CPE WAN Management Protocol (CWMP). It defines an application layerprotocol for remote management of end-user devices. It defines an application layer protocol forremote management of end-user devices.As a bidirectional SOAP/HTTP based protocol it can provides the communication between customerpremises equipment (CPE) and Auto Configuration Server (ACS). It includes both a safe configurationand the control of other CPE management functions within an integrated framework. In the course ofthe booming broadband market, the number of different internet access possibilities grew as well (e.g.modems, routers, gateways, set-top box, VoIP-phones).At the same time the configuration of thisequipment became more complicated –too complicated for end-users. For this reason, TR-069 wasdeveloped. It provides the possibility of auto configuration of the access types. Using TR-069 theterminals can get in contact with the Auto Configuration Servers (ACS) and establish the configurationautomatically and let ACS configure CPE automatically.CWMP: Select activated to enable CWMP.ACS Login InformationURL: Enter the ACS server login URL.User Name: Specify the ACS User Name for ACS authentication to the connection from CPE.Password: Enter the ACS server login password.