BEC 6300VNL User Manual
Also see for 6300VNL: User manualUser manualQuick start guideQuick start guide
                                                                                                                                     | |
Contents
| 
Product OverviewSystem Recovery Procedures 8BEC 6300VNL User ManualSystem Recovery ProceduresThe purpose is to allow users to restore the MX-1000 to its initial stage when the device is outage,upgraded to a wrong / broken firmware, cannot access to the GUI with wrong username and/orpassword, etc.Step 1 – Configure your PC Network IP AddressBefore performing the system recovery, assign this IP address and Netmask to your PC,192.168.1.100 and 255.255.255.0 respectively.Step 2 – Reset your 6300VNL Device2.1 Power off your 6300VNL2.2 Power on the 6300VNL while pushing the RESET button with a small pointed object (such aspaper clip, needle, toothpick, and etc.).2.3 When the POWER LED turns RED, keep holding and pushing the RESET button until theINTERNET LED flashes in GREENStep 3 – Restore your 6300VNL DeviceWith INTERNET light flashes green, 6300VNL is in recovery mode and ready for a new Firmware.3.1 Open a web browser and type the IP address, 192.168.1.1, to access to the recovery page.NOTE: In the recovery mode, 6300VNL will not respond to any PING or other requests.3.2 Browse to the new Firmware image file then click Upload to start the upgrade process.3.3 INTERNET LED turns red means the Firmware upgrade is in process.DO NOT power off or reboot the device, it would permanently damage your 6300VNL.3.4 INTERNET LED turns green after the Firmware upgrade completed3.5 Power cycle on & off to regain access to the 6300VNL. |
Related manuals for BEC 6300VNL
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine