Baby Lock A-LINE Grace BL40 Instruction And Reference Manual

Contents

Baby Lock A-LINE Grace BL40 Instruction And Reference Manual Manual pdf 15 page image

131Preparing for Upper and Lower ThreadingWinding the bobbinWind the thread onto the bobbin.aTurn on the sewing machine.b Place the bobbin on the bobbin winder shaftso that the spring on the shaft fits into thenotch in the bobbin.a Notchb Bobbin winder shaft springc Slide the bobbin winder shaft to the right untilit snaps into place.dSwing up the spool pin, and then remove thespool cap.a Spool pinb Spool capeFully insert the spool of thread for the bobbinonto the spool pin.Slide the spool onto the pin so that the spool ishorizontal and the thread unwinds to the frontat the bottom.● The included bobbin was designed specifically for this sewing machine. The machine will not operatecorrectly if older model bobbins, which have a different thickness, are used. Use only the enclosedbobbin or bobbins of the same type. Using a bobbin other than the one designed specifically for thismachine may result in injuries or damage to the machine.a Hook of thebobbin-windingthread guideb Pretention diskc Bobbin windershaftd BobbinCAUTIONa bca This modelb Other modelc 11.5 mm (7/16 inch)(actual size)ab● If the spool is not positioned so that the threadunwinds correctly, the thread may becometangled around the spool pin.abCAUTION