Baby Lock A-LINE Grace BL40 Instruction And Reference Manual

Contents

Baby Lock A-LINE Grace BL40 Instruction And Reference Manual Manual pdf 63 page image

613Zipper InsertionA zipper can be sewn in place.The values below “Auto” are set when the pattern is selected. The setting can be adjusted to any value within the rangeindicated below “Manual”.There are many methods for attaching zippers. Therefore, only the procedures for inserting a centered zipperand a side zipper are described below.Inserting a centered zipperStitching is sewn on both pieces of fabric buttedagainst each other.a Right side of fabricb Stitchingc End of zipper openingaTurn on the machine.bAttach zigzag foot “J” and sew straightstitches up to the zipper opening.With the right sides of the fabric facing eachother, sew reverse stitches after reaching thezipper opening.• For details on basic stitching, refer to “BasicStitching” (page 51).c Baste the two pieces up to the edge of thefabric.a Basting stitchingb Reverse stitchingc Wrong side of fabricd End of zipper openingd Press open the seam allowance from the wrongside of the fabric.a Wrong side of fabricStitch NamePatternPresser FootApplicationStitch Width[mm (inch)]Stitch Length[mm (inch)]Twin NeedleWalk-ingFootReverse/ReinforcementStitchingAuto Manual Auto ManualStraightstitch Center JAttaching zippers,basic stitching, andsewing gathers orpintucks, etc.3.5(1/8)0.0–7.0(0–1/4)2.5(3/32)0.2–5.0(1/64–3/16)Yes(J) Yes Reverse* 1Do not use reverse stitching.● Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if abutton is accidentally pressed and the machine starts sewing.*1CAUTIONabcab cda