Baby Lock A-LINE Grace BL40 Instruction And Reference Manual

Contents

Baby Lock A-LINE Grace BL40 Instruction And Reference Manual Manual pdf 46 page image

SEWING BASICS ———————————————————————————————————————————————————————————————————————————————————————————————————————44Cutting the threadaWhen you wish to finish the stitching and thesewing machine is stopped, press (needleposition button) once to raise the needle.a Needle position buttonX The needle is raised.bRaise the presser foot lever.a Presser foot leverc Pull the fabric to the left side of the machine,and then pass the threads through the threadcutter to cut them.a Thread cutterAutomatically sewing reverse/reinforcement stitchesThe sewing machine can be set to automatically sewreverse or reinforcement stitches at the beginningand end of the stitching. With straight stitches andzigzag stitches, reverse stitches, not reinforcementstitches, are automatically sewn.aSelect a stitch.• For details, refer to “Selecting a stitch”(page 38).bPress (automatic reverse/reinforcementstitch key).a Automatic reverse/reinforcement stitch keyX appears in the LCD.• This step is not necessary if a stitch such asthose for sewing buttonholes and bar tacks isselected where reinforcement stitches areautomatically sewn.• Press (automatic reverse/reinforcementstitch key) again to cancel automatic reverse/reinforcement stitching.c Position the fabric under the presser foot, andturn the handwheel toward you to insert theneedle into the fabric.dPress (start/stop button) once.a Start/stop buttonX After reverse/reinforcement stitches aresewn, the machine starts sewing.aa