Bacharach Portable Combustion Analyzer Instruction

Also see for PCA 20: Product catalog Operating & maintenance instructions

Contents

Bacharach Portable Combustion Analyzer Instruction Manual pdf 29 page image

PCA4.10 Memory Directory ScreenOperation‘Standard’ PCA Screen ‘Advanced’ PCA ScreenMEMORY DIRECTORY MEMORY DIRECTORY«M8 2/24/01 3:45pm «98 2/24/01 3:45pmM9 MEMORY EMPTY 99 MEMORY EMPTYCLEAR MEMORY CLEAR MEMORYThe Memory Directory Screen is displayed by repeatedly pressing theMENU key from the Combustion Test Screen. This screen is used to select amemory location which contains saved data that an operator can review.NOTE: A ‘standard’ PCA has 10 memory locations num-bered M0 thru M9, while an ‘advanced’ PCA has 100 memorylocations numbered 0 thru 99.To select a data-memory location, first use the st keys to move the cursor( z ) in front of the desired memory location; then press the ENTER key. Thesaved data is now displayed in either the Combustion Test Screen or DraftScreen, depending on whether the chosen memory location containscombustion or draft information. To print the saved data, refer to Sec- tion4.23.After viewing or printing the saved data, use the st keys to move thecursor (z ) to the exit ( E ) function; then press ENTER. This will redisplay thememory directory.Selecting the CLEAR MEMORY function displays the Clear MemoryScreen from where all saved data can be erased (refer to Section 4.24).Front Panel Key Functions:– Move cursor ( z ) up– Move cursor ( z ) down– Display the data saved at the chosen memory location– Go to Combustion Test Screen– Go to Memory To PC Screen for ‘Advanced’ analyzers, or theTemperature Setup Screen for ‘Basic’ analyzersInstruction 0024-9219 4-13