525.5.1.4.1 Neigh Freq List1. In the eNB GUI go to LTE Setting > 3G Freq/Cell (Figure 5-27).Figure 5-27: 3G Freq/Cell2. Under Neigh Freq List, click on the Add icon to add the neighboring 3G eNBs’frequencies (up to 12). Each field is described in Table 5-15. Click on Save after settingthe values.Table 5-15: Neigh Freq ListParameter Name DescriptionutraCarrierArfcn Frequency point of the neighbor frequencyqRxLevMin Minimum access level. Only if the received signal powermeasured by the UE is higher than this threshold, can the UEconnect to this cell.qQualMin The threshold for the lowest access.Range: -24 to 0.Reselection Priority Priority of the reselection to cells at this frequencythreshXHigh Reselection threshold for higher priority inter-bandfrequencies. This parameter represents the access thresholdlevel at which the UE will leave the serving cell and reselectanother cell at the target frequency, given that the targetfrequency cell has a cell reselection priority higher than theserving onethreshXLow Reselection threshold for lower priority inter-bandfrequencies.This parameter represents the access threshold level at whichthe UE will leave the serving cell and reselect another cell atthe target frequency, given that the target frequency cell hasan absolute priority lower than the serving one.pMaxUtra Maximum transmit power a UE is allowed to use in the uplink.The purpose is to limit the transmit power of UEs within thiscell.threshServingHighqR9 High RSRQ threshold of priority reselection.Range: 0 to 31.
